Prior to purchasing products from the USB-IF, please review our return policy and legal disclaimer.
Please review the USB-IF Compliance Updates webpage frequently for the latest information regarding the USB-IF Compliance Program. The updates may contain information on test requirements and/or test procedures.
Subscribe to the USB-IF Compliance Update Mailing List by emailing admin@usb.org.
Product Order Form
To order any of the items below please complete and email the USB Product Order Form:
USB4 CV Host System
The USB4 CV Host system is utilized in USB4 CV Testing. The PC system comprises an USB4 Add-In Host Card configured specifically for USB4 CV testing.
This item is available to USB-IF Members only.. Please note this product has a lead of approximately one month. USB4 CV Host System can be ordered by completing and emailing the USB-IF Product Order Form
USB Type-C® Authentication Compliance Bridge (ACB)
The USB Type-CTM Authentication Compliance Bridge (ACB) used with the USB Type-CTM Authentication Test Suite in USB3CV to allow testing of USB PD Authentication Responders. The ACB is required for testing USB PD Sources, Sinks, and Cables that support USB Type-CTM Authentication. The ACB is not needed to test USB devices.
QuadraMAX USB Type-C® and PD Tester
The USB-IF QuadraMAX is an official hardware platform for several certification testing functionalities. It is an electronic load for the USB Type-C and PD Source Power Tests (SPT), a cable tester for USB Type-C End Product Cable tests (EPC), and it provides a manual control window for custom load testing and PD traffic generation.
The applicable testing specs are available in the Document Library:
USB Type-CTM and Power Delivery Source Power Requirements Test Specification
USB Type-CTM End Product Cable Test Plan
The software can be found here.
QuadraMAX Tool Details
- The QuadraMAX consists of four sink ports.
- Up to three QuadraMAXes can be linked for testing devices with up to 12 ports.
- Each sink can load 100W. Across four ports the QuadraMAX can maintain 320W load, with a peak of 400W.
- QuadraMAX uses a CC load and a CR load. The CR load is achieved with a 75us FW feedback loop.
- QuadraMAX Vbus tolerance before load drops is 2 V - 2.5 V.
- QuadraMAX captures Vbus voltage and current in 15us - 250us adjustable sample rates. Captures taken during connect / disconnect / voltage transition / load transition / hard reset.
- Port 4 can also be programmed to a 5V 5A source. This is used during cable testing and can also be done for manual debug through the QuadDraw Reins window.
- Port 1 has a switchable ground isolation from the other ports during the cable drop test.
- QuadDraw automatically updates to the latest software and firmware when the controlling computer has an internet connection.
Each QuadraMAX includes the following:
- Qty 1 - QuadraMAX
- Qty 1 - Power Supply with ferrite core (12V 4.2A)